Mayco C-30HDNI
The cleaner burning C-30HDNI concrete pump from Multiquip's Mayco Pump Division offers improved 
efficiency and engine performance.
Like the standard C-30HDN, this small-line concrete machine pumps up to 25-cubic yards (19-cubic meters) of concrete an hour. It does however utilize a more powerful 51-horsepower Nissan gasoline engine while the pump's electronic ignition boosts engine performance up to 10 percent, improves fuel efficiency and meets the EPA's January 2004 Tier II emission standards. The C-30HDNI pumps a maximum aggregate of 0.5-inch minus (12 mm.) and comes standard with a remote control for easy operation.
Performance Data
- Pumping Rate (cu. yards per hour): 25 (18.9)
- Maximum Aggregate Size in. (mm): 1/2 (12)
- Vertical pumping height ft (m): 150 (46)
- Horizontal Pumping Distance ft (m): 500 (152)
- Remote Control: Standard (with 125 ft. cable)
- Material Hose: 2, 2 1/2
- Minimum Concrete Slump in. (mm): 1
- Pump Type: Reciprocating piston
- Hopper Capacity - ft³ (m³): 6 (.17)
- Power Source
- Engine Power - HP: 51
- Fuel Tank Capacity - gal :11
- Engine Model: Nissan A15 Industrial
- Fuel Type: Gasoline
- Engine Cover (Hood): Standard
Dimensions
- Shipping Weight - lb. (kg): 2,873
- Operating Weight lbs. (kg): 2,950 (1,338)
- Tire Size: 7.35 x 14
Machine Technologies Offers the Finest Equipment and Service
|
 |
 |
 |
 |
© 2008 Machine Technologies, Inc.
620 CR 4841 • Haslet, TX 76052
817-439-1108 • 817-439-0633 Fax
Contact: info@machine-technologies.com
|
Mayco MQ-30 Plaster and Fireproofing Pumps
Mayco material pumps = higher
production = higher profits. 
The expertise and know-how that has made Mayco the leading manufacturer of small line concrete and grout pumps is an integral part of the design of the MG-30. Mayco material pumps are powerful, rugged, reliable and efficient-- engineered to meet the challenging production requirements of high-volume projects and built to withstand the punishment on any job-site.
- Centralized grease panel - allows greasing of all bearings
without opening the hood.
- Fully enclosed lubrication box -- eliminates oil puddles under your pump.
- Gravity feed piston cup oiler -- maximum efficiency; increases piston cup service life.
- Heavy duty drive line -- thicker 2-15/16" crankshaft; McGill bearings; cast iron step cone pulley -- for longer service life and minimum downtime for repairs.
- Adjustable piston stroke and piston cycling rates -- allows fine tuning of pump output to meet production needs of any job. Eight possible pumping rates!
- Pump manifold cast from stronger steel with thicker walls -- increases service life.
- Hardwire remote standard -- allows easy control by nozzleman.
- Gravity Feed Piston Lubrication
- Heavy-duty drive assembly -- consists of a larger-2-15/16" crankshaft, steel crank bearing and heavy-duty connecting rod.
MG-30 Options
- The Mobile Package:
An MG-30M pump with the Essick EM120 model 12ft.³plaster/fireproofing mixer mounted on a trailer.
- The Tag Package:
Trailer-mounted MG-30T without mixer.
- Fire Chief Package:
Delivery rate maximized by modified material valving,which includes; steel balls, the FireWizard and a 3"pump outlet.
- The Plastering Package:
Features the standard material manifold and 2" pump outlet.
Designed for high production placement of:
- Exterior stucco, sand/cement exterior basecoat (brown & scratch)
- Gypsum plaster and lightweight aggregate
- Interior basecoat plaster
- Pool plaster, including Pebble-Tec®
- Fireproofing/high production
Machine Technologies Offers the Finest Equipment and Service
|
|
|
|
|
© 2008 Machine Technologies, Inc.
620 CR 4841 • Haslet, TX 76052
817-439-1108 • 817-439-0633 Fax
Contact: info@machine-technologies.com
|
 |
 |
 |
 |
Mayco MQ-30 Plaster and Fireproofing Pumps
Mayco material pumps = higher
production = higher profits.
The expertise and know-how that has made Mayco the leading manufacturer of small line concrete and grout pumps is an integral part of the design of the MG-30. Mayco material pumps are powerful, rugged, reliable and efficient-- engineered to meet the challenging production requirements of high-volume projects and built to withstand the punishment on any job-site.
- Centralized grease panel - allows greasing of all bearings
without opening the hood.
- Fully enclosed lubrication box -- eliminates oil puddles under your pump.
- Gravity feed piston cup oiler -- maximum efficiency; increases piston cup service life.
- Heavy duty drive line -- thicker 2-15/16" crankshaft; McGill bearings; cast iron step cone pulley -- for longer service life and minimum downtime for repairs.
- Adjustable piston stroke and piston cycling rates -- allows fine tuning of pump output to meet production needs of any job. Eight possible pumping rates!
- Pump manifold cast from stronger steel with thicker walls -- increases service life.
- Hardwire remote standard -- allows easy control by nozzleman.
- Gravity Feed Piston Lubrication
- Heavy-duty drive assembly -- consists of a larger-2-15/16" crankshaft, steel crank bearing and heavy-duty connecting rod.
MG-30 Options
- The Mobile Package:
An MG-30M pump with the Essick EM120 model 12ft.³plaster/fireproofing mixer mounted on a trailer.
- The Tag Package:
Trailer-mounted MG-30T without mixer.
- Fire Chief Package:
Delivery rate maximized by modified material valving,which includes; steel balls, the FireWizard and a 3"pump outlet.
- The Plastering Package:
Features the standard material manifold and 2" pump outlet.
Designed for high production placement of:
- Exterior stucco, sand/cement exterior basecoat (brown & scratch)
- Gypsum plaster and lightweight aggregate
- Interior basecoat plaster
- Pool plaster, including Pebble-Tec®
- Fireproofing/high production
Machine Technologies Offers the Finest Equipment and Service
|
|
|
|
|
© 2008 Machine Technologies, Inc.
620 CR 4841 • Haslet, TX 76052
817-439-1108 • 817-439-0633 Fax
Contact: info@machine-technologies.com
|
|
 |
 |
 |
 |
 |
 |
Mayco MQ-30 Plaster and Fireproofing Pumps
Mayco material pumps = higher
production = higher profits.
The expertise and know-how that has made Mayco the leading manufacturer of small line concrete and grout pumps is an integral part of the design of the MG-30. Mayco material pumps are powerful, rugged, reliable and efficient-- engineered to meet the challenging production requirements of high-volume projects and built to withstand the punishment on any job-site.
- Centralized grease panel - allows greasing of all bearings
without opening the hood.
- Fully enclosed lubrication box -- eliminates oil puddles under your pump.
- Gravity feed piston cup oiler -- maximum efficiency; increases piston cup service life.
- Heavy duty drive line -- thicker 2-15/16" crankshaft; McGill bearings; cast iron step cone pulley -- for longer service life and minimum downtime for repairs.
- Adjustable piston stroke and piston cycling rates -- allows fine tuning of pump output to meet production needs of any job. Eight possible pumping rates!
- Pump manifold cast from stronger steel with thicker walls -- increases service life.
- Hardwire remote standard -- allows easy control by nozzleman.
- Gravity Feed Piston Lubrication
- Heavy-duty drive assembly -- consists of a larger-2-15/16" crankshaft, steel crank bearing and heavy-duty connecting rod.
MG-30 Options
- The Mobile Package:
An MG-30M pump with the Essick EM120 model 12ft.³plaster/fireproofing mixer mounted on a trailer.
- The Tag Package:
Trailer-mounted MG-30T without mixer.
- Fire Chief Package:
Delivery rate maximized by modified material valving,which includes; steel balls, the FireWizard and a 3"pump outlet.
- The Plastering Package:
Features the standard material manifold and 2" pump outlet.
Designed for high production placement of:
- Exterior stucco, sand/cement exterior basecoat (brown & scratch)
- Gypsum plaster and lightweight aggregate
- Interior basecoat plaster
- Pool plaster, including Pebble-Tec®
- Fireproofing/high production
Machine Technologies Offers the Finest Equipment and Service
|
|
|
|
|
© 2008 Machine Technologies, Inc.
620 CR 4841 • Haslet, TX 76052
817-439-1108 • 817-439-0633 Fax
Contact: info@machine-technologies.com
|
Mayco MQ-30 Plaster and Fireproofing Pumps
Mayco material pumps = higher
production = higher profits.
The expertise and know-how that has made Mayco the leading manufacturer of small line concrete and grout pumps is an integral part of the design of the MG-30. Mayco material pumps are powerful, rugged, reliable and efficient-- engineered to meet the challenging production requirements of high-volume projects and built to withstand the punishment on any job-site.
- Centralized grease panel - allows greasing of all bearings
without opening the hood.
- Fully enclosed lubrication box -- eliminates oil puddles under your pump.
- Gravity feed piston cup oiler -- maximum efficiency; increases piston cup service life.
- Heavy duty drive line -- thicker 2-15/16" crankshaft; McGill bearings; cast iron step cone pulley -- for longer service life and minimum downtime for repairs.
- Adjustable piston stroke and piston cycling rates -- allows fine tuning of pump output to meet production needs of any job. Eight possible pumping rates!
- Pump manifold cast from stronger steel with thicker walls -- increases service life.
- Hardwire remote standard -- allows easy control by nozzleman.
- Gravity Feed Piston Lubrication
- Heavy-duty drive assembly -- consists of a larger-2-15/16" crankshaft, steel crank bearing and heavy-duty connecting rod.
MG-30 Options
- The Mobile Package:
An MG-30M pump with the Essick EM120 model 12ft.³plaster/fireproofing mixer mounted on a trailer.
- The Tag Package:
Trailer-mounted MG-30T without mixer.
- Fire Chief Package:
Delivery rate maximized by modified material valving,which includes; steel balls, the FireWizard and a 3"pump outlet.
- The Plastering Package:
Features the standard material manifold and 2" pump outlet.
Designed for high production placement of:
- Exterior stucco, sand/cement exterior basecoat (brown & scratch)
- Gypsum plaster and lightweight aggregate
- Interior basecoat plaster
- Pool plaster, including Pebble-Tec®
- Fireproofing/high production
Machine Technologies Offers the Finest Equipment and Service
|
|
|
|
|
© 2008 Machine Technologies, Inc.
620 CR 4841 • Haslet, TX 76052
817-439-1108 • 817-439-0633 Fax
Contact: info@machine-technologies.com
|
Mayco MQ-30 Plaster and Fireproofing Pumps
Mayco material pumps = higher
production = higher profits.
The expertise and know-how that has made Mayco the leading manufacturer of small line concrete and grout pumps is an integral part of the design of the MG-30. Mayco material pumps are powerful, rugged, reliable and efficient-- engineered to meet the challenging production requirements of high-volume projects and built to withstand the punishment on any job-site.
- Centralized grease panel - allows greasing of all bearings
without opening the hood.
- Fully enclosed lubrication box -- eliminates oil puddles under your pump.
- Gravity feed piston cup oiler -- maximum efficiency; increases piston cup service life.
- Heavy duty drive line -- thicker 2-15/16" crankshaft; McGill bearings; cast iron step cone pulley -- for longer service life and minimum downtime for repairs.
- Adjustable piston stroke and piston cycling rates -- allows fine tuning of pump output to meet production needs of any job. Eight possible pumping rates!
- Pump manifold cast from stronger steel with thicker walls -- increases service life.
- Hardwire remote standard -- allows easy control by nozzleman.
- Gravity Feed Piston Lubrication
- Heavy-duty drive assembly -- consists of a larger-2-15/16" crankshaft, steel crank bearing and heavy-duty connecting rod.
MG-30 Options
- The Mobile Package:
An MG-30M pump with the Essick EM120 model 12ft.³plaster/fireproofing mixer mounted on a trailer.
- The Tag Package:
Trailer-mounted MG-30T without mixer.
- Fire Chief Package:
Delivery rate maximized by modified material valving,which includes; steel balls, the FireWizard and a 3"pump outlet.
- The Plastering Package:
Features the standard material manifold and 2" pump outlet.
Designed for high production placement of:
- Exterior stucco, sand/cement exterior basecoat (brown & scratch)
- Gypsum plaster and lightweight aggregate
- Interior basecoat plaster
- Pool plaster, including Pebble-Tec®
- Fireproofing/high production
Machine Technologies Offers the Finest Equipment and Service
|
|
|
|
|
© 2008 Machine Technologies, Inc.
620 CR 4841 • Haslet, TX 76052
817-439-1108 • 817-439-0633 Fax
Contact: info@machine-technologies.com
|